adding exp1/2 data, writing

README.md

@@ -6,3 +6,25 @@ Evaluating a neural network using the MatLab `cancer_dataset`. Development conta
 2. Multiple classifier performance using majority vote
 3. Repeat 2 with two different optimisers (`trainlm`, `trainrp`)
 4. ***Extension***: Distinguish between two equi-probable classes of overlapping 2D Gaussians
+
+![Image](graphs/exp1-test2-1-error-rate-curves.png)
+
+## Timing
+
+### exp 1
+
+CPU: 2min 36s ± 1.66 s per loop (mean ± std. dev. of 2 runs, 2 loops each)
+
+GPU: 3min 5s ± 2.95 s per loop (mean ± std. dev. of 2 runs, 2 loops each)
+
+### exp 2
+
+CPU: 26 s ± 62.9 ms per loop (mean ± std. dev. of 2 runs, 2 loops each)
+
+GPU: 57.6 s ± 46.7 ms per loop (mean ± std. dev. of 2 runs, 2 loops each)
+
+### exp 3
+
+CPU: 1min 19s ± 1.6 s per loop (mean ± std. dev. of 2 runs, 2 loops each)
+
+GPU: 3min 25s ± 280 ms per loop (mean ± std. dev. of 2 runs, 2 loops each)

report/report.lyx

@@ -404,7 +404,7 @@ noprefix "false"
  in conjunction.
  The effect of varying the number of nodes and epochs throughout the ensemble
  was considered in order to determine whether combining multiple models
- could produce a better accuracy than those individually.
+ could produce a better accuracy than any individual model.
  Section 
 \begin_inset CommandInset ref
 LatexCommand ref
@@ -432,7 +432,7 @@ noprefix "false"
 \end_layout
 
 \begin_layout Section
-Hidden Nodes & Epochs (Exp 1)
+Hidden Nodes & Epochs
 \begin_inset CommandInset label
 LatexCommand label
 name "sec:exp1"
@@ -443,21 +443,257 @@ name "sec:exp1"
 \end_layout
 
 \begin_layout Standard
-This section investigates the effect of varying the number of hidden nodes
+This section investigates the effect of varying the number of nodes in the
- in a single hidden layer of a multi-layer perceptron.
+ single hidden layer of a shallow multi-layer perceptron.
- This is compared to the effect of varying 
+ This is compared to the effect of training the model with different numbers
+ of epochs.
+ Throughout the experiment, stochastic gradient descent with momentum is
+ used as the optimiser, variations in both momentum and learning rate are
+ presented.
+ 
 \end_layout
 
 \begin_layout Subsection
 Results
 \end_layout
 
+\begin_layout Standard
+\begin_inset Float figure
+wide false
+sideways false
+status open
+
+\begin_layout Plain Layout
+\noindent
+\align center
+\begin_inset Graphics
+	filename ../graphs/exp1-test1-error-rate-curves.png
+	lyxscale 50
+	width 50col%
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Plain Layout
+\begin_inset Caption Standard
+
+\begin_layout Plain Layout
+Varied hidden node performance results over varied training lengths for
+ 
+\begin_inset Formula $\eta=0.01$
+\end_inset
+
+, 
+\begin_inset Formula $p=0$
+\end_inset
+
+
+\begin_inset CommandInset label
+LatexCommand label
+name "fig:exp1-test1"
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+Figure 
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "fig:exp1-test1"
+plural "false"
+caps "false"
+noprefix "false"
+
+\end_inset
+
+ visualises the performance of hidden nodes up to 256 over training periods
+ up to 200 epochs in length.
+ In general, the error rate can be seen to decrease when the models are
+ trained for longer.
+ Increasing the number of nodes decreases the error rate and increases the
+ gradient with which it falls up to a limit.
+ 64, 128 and 256 hidden nodes lie close together as the increases in performance
+ slow.
+ Between 0 and 25 epochs, the error rate throughout for any number of nodes
+ can descend little below 0.35.
+ The number of epochs to overcome this plateau is different for each number
+ of nodes.
+\end_layout
+
+\begin_layout Standard
+The standard deviations for the above discussed results of figure 
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "fig:exp1-test1"
+plural "false"
+caps "false"
+noprefix "false"
+
+\end_inset
+
+ can be seen in figure 
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "fig:exp1-test1-std"
+plural "false"
+caps "false"
+noprefix "false"
+
+\end_inset
+
+.
+ As the network starts training, the standard deviation decreases to a minimum
+ between 
+\begin_inset Formula $10-20$
+\end_inset
+
+ epochs before increasing to a peak at 64.
+ As the number of hidden nodes increases, the standard deviation decreases.
+ The initial drop is sharper and the 64 epoch peak increases higher.
+ 
+\end_layout
+
+\begin_layout Standard
+\begin_inset Float figure
+wide false
+sideways false
+status open
+
+\begin_layout Plain Layout
+\noindent
+\align center
+\begin_inset Graphics
+	filename /mnt/files/dev/py/shallow-training/graphs/exp1-test1-test-train-error-rate-std.png
+	lyxscale 50
+	width 60col%
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Plain Layout
+\begin_inset Caption Standard
+
+\begin_layout Plain Layout
+Standard deviation of results from figure 
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "fig:exp1-test1"
+plural "false"
+caps "false"
+noprefix "false"
+
+\end_inset
+
+ with 
+\begin_inset Formula $\eta=0.01$
+\end_inset
+
+, 
+\begin_inset Formula $p=0$
+\end_inset
+
+
+\begin_inset CommandInset label
+LatexCommand label
+name "fig:exp1-test1-std"
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset Float figure
+wide false
+sideways false
+status open
+
+\begin_layout Plain Layout
+\noindent
+\align center
+\begin_inset Graphics
+	filename /mnt/files/dev/py/shallow-training/graphs/exp1-test2-2-error-rate-curves.png
+	lyxscale 50
+	width 50col%
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Plain Layout
+\begin_inset Caption Standard
+
+\begin_layout Plain Layout
+Varied hidden node performance results over varied training lengths for
+ 
+\begin_inset Formula $\eta=0.1$
+\end_inset
+
+, 
+\begin_inset Formula $p=0$
+\end_inset
+
+
+\begin_inset CommandInset label
+LatexCommand label
+name "fig:exp1-test2-2"
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
 \begin_layout Subsection
 Discussion
 \end_layout
 
 \begin_layout Section
-Ensemble Classification (Exp 2)
+Ensemble Classification
 \begin_inset CommandInset label
 LatexCommand label
 name "sec:exp2"
@@ -467,16 +703,239 @@ name "sec:exp2"
 
 \end_layout
 
+\begin_layout Standard
+A horizontal ensemble of 
+\begin_inset Formula $m$
+\end_inset
+
+ models was constructed with majority vote in order to investigate whether
+ this could improve performance over that of any single model.
+ In order to introduce variation between models of the ensemble, a range
+ for hidden nodes and epochs could be defined.
+ When selecting parameters throughout the ensemble, the models are equally
+ distributed throughout the ranges
+\begin_inset Foot
+status open
+
+\begin_layout Plain Layout
+For 
+\begin_inset Formula $m=1$
+\end_inset
+
+, the average of the range is taken
+\end_layout
+
+\end_inset
+
+.
+ 
+\end_layout
+
+\begin_layout Standard
+The statistic 
+\emph on
+agreement
+\emph default
+, 
+\begin_inset Formula $a$
+\end_inset
+
+, is defined as the proportion of models under the meta-classifier that
+ correctly predict a sample's class when the ensemble correctly classifies.
+ It could also be considered the confidence of the meta-classifier, for
+ one horizontal model 
+\begin_inset Formula $a_{m=1}=1$
+\end_inset
+
+.
+ As error rates are presented, this is inverted by 
+\begin_inset Formula $1-a$
+\end_inset
+
+ to 
+\emph on
+disagreement
+\emph default
+, 
+\begin_inset Formula $d$
+\end_inset
+
+, the proportion of incorrect models when correctly group classifying.
+\end_layout
+
 \begin_layout Subsection
 Results
 \end_layout
 
+\begin_layout Standard
+For comparison, the average individual accuracy for both test and training
+ data are presented.
+\end_layout
+
+\begin_layout Standard
+\begin_inset Float figure
+wide false
+sideways false
+status open
+
+\begin_layout Plain Layout
+\noindent
+\align center
+\begin_inset Graphics
+	filename ../graphs/exp2-test8-error-rate-curves.png
+	lyxscale 50
+	width 50col%
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Plain Layout
+\begin_inset Caption Standard
+
+\begin_layout Plain Layout
+Ensemble classifier performance results for 
+\begin_inset Formula $\eta=0.03$
+\end_inset
+
+, 
+\begin_inset Formula $p=0.01$
+\end_inset
+
+, nodes = 1 - 400, epochs = 5 - 100
+\begin_inset CommandInset label
+LatexCommand label
+name "fig:exp2-test8"
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+An experiment with a fixed epoch value throughout the ensemble is presented
+ in figure 
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "fig:exp2-test10"
+plural "false"
+caps "false"
+noprefix "false"
+
+\end_inset
+
+.
+ Nodes between 1 and 400 were selected for the classifiers with a learning
+ rate, 
+\begin_inset Formula $\eta=0.15$
+\end_inset
+
+ and momentum, 
+\begin_inset Formula $p=0.01$
+\end_inset
+
+.
+ The ensemble accuracy can be seen to be fairly constant throughout the
+ number of horizontal models with 3 models being the least accurate with
+ a higher standard deviation.
+ 3 horizontal models also shows a significant spike in disagreement and
+ individual error rates which gradually decreases as the number of models
+ increases.
+\end_layout
+
+\begin_layout Standard
+\begin_inset Float figure
+wide false
+sideways false
+status open
+
+\begin_layout Plain Layout
+\noindent
+\align center
+\begin_inset Graphics
+	filename ../graphs/exp2-test10-error-rate-curves.png
+	lyxscale 50
+	width 50col%
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Plain Layout
+\begin_inset Caption Standard
+
+\begin_layout Plain Layout
+Ensemble classifier performance results for 
+\begin_inset Formula $\eta=0.15$
+\end_inset
+
+, 
+\begin_inset Formula $p=0.01$
+\end_inset
+
+, nodes = 
+\begin_inset Formula $1-400$
+\end_inset
+
+, epochs = 20
+\begin_inset CommandInset label
+LatexCommand label
+name "fig:exp2-test10"
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
 \begin_layout Subsection
 Discussion
 \end_layout
 
+\begin_layout Standard
+From the data of figure 
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "fig:exp2-test10"
+plural "false"
+caps "false"
+noprefix "false"
+
+\end_inset
+
+, 3 horizontal models was shown to be the worst performing configuration
+ with lower ensemble accuracy and higher disagreement.
+ This is likely due to larger proportion that a single model constitutes.
+ 
+\end_layout
+
 \begin_layout Section
-Optimiser Comparisons (Exp 3)
+Optimiser Comparisons
 \begin_inset CommandInset label
 LatexCommand label
 name "sec:exp3"
@@ -486,6 +945,20 @@ name "sec:exp3"
 
 \end_layout
 
+\begin_layout Standard
+Throughout the previous experiments the stochastic gradient descent optimiser
+ was used to change the networks weights but there are many different optimisati
+on algorithms.
+ This section will present investigations into two other optimisation algorithms
+ and discuss the differences between them using the horizontal ensemble
+ classification of the previous section.
+\end_layout
+
+\begin_layout Standard
+Prior to these investigations, however, stochastic gradient descent and
+ the two other subject algorithms will be described.
+\end_layout
+
 \begin_layout Subsection
 Optimisers
 \end_layout
@@ -510,10 +983,6 @@ Results
 Discussion
 \end_layout
 
-\begin_layout Section
-Overlapping 2D Gaussians (Exp 4)
-\end_layout
-
 \begin_layout Section
 Conclusions
 \end_layout